You can’t start a factory cleaning with a mop. Machinery needs degreasing. Floors need scrubbing. Surfaces need sanitising. Before starting cleaning, a lot of clutter, old equipment, packaging waste, and even pallets are removed to clear the area. It’s the key to a good factory cleanup where every surface can be cleaned safely and efficiently.  

JunkLift offers industrial factory cleaning services Perth, including a full range of junk lifting, cleaning, degreasing, and sanitising of the floor and all equipment. 

Contact JunkLift today or get a free quote online.

Case Study: Cleaning a Kewdale Factory Floor Before an Inspection

A manufacturing company in Kewdale with a very short deadline approached JunkLift. A safety inspection was scheduled in three days, but the factory floor was not ready. A corner was full of unused old machinery. Walkways were clogged with broken pallets and packaging waste. One wall had been blocked for months by a pile of waste metal. 

Management demanded that the site be cleared immediately without interfering with regular business operations.

The Problem

• Pallets and packaging waste were blocking walkways.
• Two old machines were taking up valuable floor space
• Scrap metal piled against one factory wall
• Grease and oil stains on the floor
• Only three days were left in the inspection

What We Did

Firstly, our team went to the site to determine what needed to be removed and to ensure a safe cleaning procedure. We worked around active work areas without disturbing the staff and cleared the other areas of the floor.

In two days, we finished the following: 

• Clearing pallets, packaging, and metal debris from the work area.
• Full degreasing of machinery by using industrial-grade degreasers 
• Floor scrubbing and pressure washing to remove stains, dust, and dirt
• Sanitising of high-contact surfaces and walkways

All the sorting was done at the site. All recyclable materials were separated from general waste. The scrap metal was sent to a licensed recycling centre in accordance with Perth waste disposal regulations.

The Result

The floor was cleaned 2 days before the inspection deadline. Walkways were open, and there was no waste in the corner. The wall filled with scrap metal was totally clear. The inspection went well. The management reported that the site was in better condition than before.

Contact JunkLift today or get a free quote online.

What Makes Factory Cleaning Different From a Regular Clean

A factory floor is different from an office or a retail space. It deals with oil, grease, metal dust, and machine traffic daily. Cleaning it properly means:

• Apply degreasers that are powerful enough to remove industrial build-up without damaging equipment
• Heavy-duty scrub and pressure wash floors designed to handle heavy loads
• Removing waste and junk before getting to walls, corners, or machine bases to prevent access blockage
• Cleaning of surfaces touched by staff regularly

Skipping any one of these steps leaves the job half done. JunkLift handles all of these tasks and provides you with thorough service instead of booking separate jobs.

What Our Industrial Factory Cleaning Services Perth Cover

Service	Included
Floor scrubbing and pressure washing	Yes
Machinery degreasing	Yes
Surface and high-contact area sanitising	Yes
Rubbish, pallet, and packaging waste clearing	Yes
Scrap metal removal	Yes, sorted and recycled
Old machinery removal	Yes, safely dismantled
General factory rubbish removal	Yes
E-waste disposal	Yes, disposed of properly
Pre-inspection cleaning	Yes
Same-week booking	Yes, subject to availability

JunkLift provides factory floor cleaning services in Perth, such as Kewdale, Welshpool, Malaga, Canning Vale, and Bibra Lake.

How Often Should a Factory Be Cleared Out?

Most factories follow one of three patterns:

• Routine clear-outs: It is done monthly or quarterly for sites that accumulate scrap or packaging waste.
• Pre-inspection or pre-clean clear-outs: It is done before an audit, inspection, or planned deep clean.
• One-off jobs: They are needed when a factory relocates or replaces machinery.

FAQs

What happens to the scrap metal and old machinery you remove? 

The sorted scrap metal is delivered to a registered scrap collection center. Old machinery is disposed of and dismantled safely, in accordance with Perth waste guidelines.

Does JunkLift do more than clear rubbish?  

Yes. We do the whole job from floor scrubbing to degreasing all machines, sanitising the surfaces, and removing any rubbish or scrap that may be in the way.

How much do factory cleaning services Perth cost? 

Cost varies depending on the amount of waste, its kind, and accessibility. Get a free no-cost quote for your site from JunkLift.

Do I need to be at the factory while you work? 

No. As we know what needs to be removed, our crew can get the job done with or without your presence. You don’t need to worry about work.

Can you handle large amounts of waste, not just small clean-ups? 

Yes. We do everything from clearing one corner of clutter to a full property clearout before a shutdown or relocation. We can take care of it all.

Which parts of Perth do you service?

We provide services to factories and industrial sites throughout Perth, including Kewdale, Welshpool, Malaga, Canning Vale, and Bibra Lake.

Book Your Factory Cleaning Services Perth Today

JunkLift can quickly remove scrap, pallets, or old machines from your factory floor. Get fast and same-day factory floor cleaning services today!

Contact JunkLift today or get a free quote online.